Stand

Kupo Master Cine Stand gives you the ultimate combination of strength and features. The solid steel construction has a maximum load capacity of 40kg The KS500412 also features the triple function universal combo head with both 1-1/8" (28mm) and 5/8" (16mm) receivers plus a multi-direction 5/8" (16mm) stud to accept any kind of mounting challenge. The KS500412 features a leveling leg that enables the user to extend one leg more than the others to level out the stand on an incline or uneven terrain. It also comes in handy on some stairs! Whether you are mounting a boom, large HMI or a green screen, this cine stand can support just about anything high above the ground. Due to the increased height, this light stand features a slightly larger footprint diameter and weighs just 1kg more.

Kupo 100mm Brake Caster (25.4mm) Square (Set 3) take your light stands mobile! They especially come in handy when you are doing work in the studio. Casters will protect your floors, keep things quiet on set and of course, make repositioning your lighting fixtures that much easier. The KS940712 is a set of three 3-15/16" (100mm) casters designed to fit 1" (25.4mm) square legs. This set of casters has brakes that prevent the wheels from rolling and keeps your stand locked in place.

Designed to support heavy gear weighing up to 40kg at its maximum height of 2.04m, the 11kg steel Master Cine Stand from Kupo has a generous footprint diameter of 1.38m for stability, and an extendable levelling leg for uneven surfaces or terrain. The triple-function universal combo head has mounting options covered. Not only does it have 1-1/8" and 5/8" receivers, but it also has a multidirectional 5/8"(16mm) stud. The Master Cine Stand folds down to 1.38m for storage and transport.

Video link : https://youtu.be/TtfmNjjMM6o

Kupo Shot Bag (15 lb, Black) is filled with 2mm-sized steel balls and is used to stabilize a stand by draping it over the legs and preventing a top-heavy light stand from falling over, while it is also used as a counterweight on a boom arm to balance a light fixture's weight.

The bag is made from a black Cordex textured nylon, and the underside has a polyurethane coating which makes it water resistant and durable.

Features

• tabilizes Light Stands or C-Stands
• Bag Filled with 2mm Steel Balls
• Used as Counterweight on Boom Arms
• Made from Cordex Textured Nylon
• Water-Resistant Polyurethane Undercoat
• Saddle Bag Design with Top Handle

Kupo Steel Senior Stand is designed to hold loads up to 45kg at a maximum working height of 15.7' (477cm) using a 3 riser, 4 section design. The stand features all-steel construction and a triple function universal head including a female 1-1/8" junior receiver and a 5/8" Baby retractable stud. This stand features a leveling leg for uneven terrain.

Features

• Constructed of chrome pated steel
• Universal head for fitting lighting fixture Comes with junior spigot/ baby pin and baby receiver
• Comes with 1 leveling leg
• Assembled by nuts and bolts for easier maintenance and tightness adjustable instead of fixed rivet

This stand may be called a baby, but don't let its name fool you! This stand will reach an impressive height of just over 12.7' (3.67 m). Besides it's impressive height it also has a load capacity of 9 kg. In addition to all the quality details that makes Kupo stand out from other brands, this stand has the mounting stud welded directly to the top riser increasing it's strength and durability, not to mention a nice clean look.

Kupo Steel Senior Stand is designed to hold loads up to 45kg at a maximum working height of 15.7' (477cm) using a 3 riser, 4 section design. The stand features all-steel construction and a triple function universal head including a female 1-1/8" junior receiver and a 5/8" Baby retractable stud. This stand features a leveling leg for uneven terrain.

Features

• Constructed of chrome pated steel
• Universal head for fitting lighting fixture Comes with junior spigot/ baby pin and baby receiver
• Comes with 1 leveling leg
• Assembled by nuts and bolts for easier maintenance and tightness adjustable instead of fixed rivet

Designed for low-level shooting, lightweight compact folding floor stand. Constructed with anodized aluminum legs and central column with die-casting leg mounts. Designed for a 28mm spigot, or a 16mm spigot with supplied adapter.

Kupo chrome plated steel Runway Base Stand is a low rolling stand base designed to work with large lighting fixtures. Adding an extension column to the junior 1-1/8”(28mm) receiver can easily create a mobile rolling stand. The leg design allows the Runway Base to be folded parallel to one another for easy storage and transportation.

Features

• 1-1/8" Receiver
• Accepts C-Stand Riser
• Braked Casters

Kupo Low Mighty Baby Stand (3.4') is a beefy all-metal stand made for supporting heavy fixtures or gear up to 15kg at low angles. It has large, ergonomic locking handles for ease of use, and is topped by a 5/8" stud.

Click Stands features a clever interlocking mechanism that allows to fold stand flat and click it to another just in a snap. The unique four-way interlocking design provides no boundary of having stands put together and keeping your kits well organized when they are closed for storage or transport. Constructed by lightweight aluminum alloy with compact size makes this portable stand ideal for outside shoots or moving around the studio. Air-cushion is equipped to prevent lighting fixture from slamming down when the locking knob is not tightened properly. Optional strap with two clasps can be attached on the plastic locking loops to easily carry a set over your shoulder. • Bi-color injection knobs offer a positive locking and ergonomic grip. Quick release clamp design on the central column for easy setup.