Blackmagic Design MultiView 16

Monitor up to 16 SDI sources using an Ultra HD monitor or television so you get twice the resolution per view! Monitor from SD, HD or Ultra HD-SDI sources in any combination, in any order! Features full frame re-sync on each input.

Features

16x 6G-SDI Inputs with Loop Outputs
4x SDI & 1x HDMI MultiView Outputs
Supports SD, HD, Ultra HD 4K, DCI 4K
2x2, 3x3, 4x4 Multi-View Configurations
Built-In LCD with Spin Knob Control
Push Buttons on Front Panel
Ethernet for Remote Control
1RU Machined Aluminum Chassis
Built-In Multi-Voltage Power Supply

Specifications

Connections
SDI Video Input	16 x 10-bit SD/HD/6G-SDI
SDI Video Output	16 x 10-bit SD/HD/6G-SDI loop outputs
Multi-View Outputs	2 x 10-bit 6G-SDI 2 x 10-bit HD-SDI 1 x HDMI, type A (supports EDID of the monitor)
Reference Input	Blackburst and TriSync for SD, HD, and 4K
Multi-Rate Support	Auto detection of SD, HD, or 6G-SDI. Simultaneous viewing of 4K, HD, and SD video.
Updates	USB 2.0 high speed (480 Mb/s) interface or via Ethernet
Control	16 buttons 5 buttons and scroll wheel for control of LCD display 1 x RJ45 Ethernet 1 x RS-422 input (for configuration layouts)
Configuration	Via front panel LCD or use either RJ45 Ethernet or USB 2.0 for firmware updates and IP address setting
Reclocking	On all SDI outputs; auto switching between SD, HD, or 6G-SDI video

Standards
Format Support	SD Format Support 625/25 PAL 525/29.97 NTSC HD Format Support 720p 50/59.94/60 1080i 50/59.94/60 1080PsF 23.98/24/25/29.97/30 1080p 23.98/24/25/29.97/30/50/59.94/60 2K Format Support 2048x1080p 23.98/24/25 2048x1080PsF 23.98/24/25 4K Format Support 3840x2160p 23.98/24/25/29.97/30 4096x2160p 24
SDI Compliance	SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 310M, SMPTE 425M-B, ITU-R BT.656, and ITU-R BT.601
SDI Video Rates	SD-SDI: 270 Mb/s HD-SDI: 1.5 Gb/s 3G-SDI: 3 Gb/s 6G-SDI: 6 Gb/s
SDI Video Sampling	4:2:2 and 4:4:4
SDI Color Precision	4:2:2 and 4:4:4 10-bit
SDI Color Space	YUV or RGB
SDI Audio Sampling	48 kHz and 24-bit
SDI Metadata Support	Video payload identification ancillary data as per SMPTE 352M

Software
Software Control	Multi-view control software included free for Windows and Mac OS X
Internal Software Upgrade	Via included updater application

General
Display	1.5" (3.81 cm) LCD (for menu settings)
Power Supply	IEC power cable required 90 to 240 VAC input
Power Fail Protection	Settings preserved and restored instantly at power on
Operating Temperature	0 to 40°C
Storage Temperature	-20 to 45°C
Relative Humidity	0 to 90% non-condensing
Rack Space	1 RU
Dimensions (W x H x D)	48.18 x 4.42 x 15.32 cm
Weight	2.1 kg