Suction Cup

Items: 19 | 
Items per page:
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart

    The 6" Pump Suction Cup with 5/8" Swivel Baby Pin from Kupo is a handy accessory for supporting lights, cameras, and grip gear when stands are not an option. Made of rubber material with silicon, the cup offers secure temporary mounting on smooth, non-porous surfaces at temperatures from 10.4 to 120 degrees Fahrenheit. 


    Features

    • Rubber Material with Silicon
    • Mounts to Smooth, Non-Porous Surfaces
    • Use from 10.4 to 120 Degrees Fahrenheit
    • RM370.00
  • Drag and drop me to the cart

    Call for Latest Price

    Ideal for mounting cameras or lighting gear on cars or glass, the 10" Suction Cup with Cheese Plate and 1.5" Starter from Kupo will maintain a tight grip at temperatures from 10.4 to 120.2°F. The unit provides a round cheese plate with multiple 3/8" mounting holes. Also included are two 1.5" starters that are 3.5" long each and permit fitting onto 1.5" speed rail systems. A pad protector is also included.

    Features

    • Ideal for Mounting Gear on Cars or Glass


    • RM0.00
  • Drag and drop me to the cart

    This Mitchell Base Bowl Adapter from Kupo easily adapts your Mitchell mount tripod or dolly for use with a 100mm bowl tripod head.

    This adapter doesn't require any tools to fits onto your Mitchell base support system. While designed for use with Mitchell base tripod legs, the bowl adapter also provides the capability of rigging tripod heads with 100mm bowl mounts to hi-hats or cheese plates; Kupo has enabled this feature by machining the aluminum adapter with five countersunk holes for simple setup.

    • Adapts Mitchell Base to 100mm Bowl
    • Countersunk Holes to Mount as Hi-Hat
    • Use on Mitchell Base or Cheese Plate
    • Machined Aluminum Construction 


    Video links: https://youtu.be/mmQEZyQPubQ?si=q03MY5-i4jcNhM-m


    • RM498.00
  • Drag and drop me to the cart

    Aluminum clamp with 5/8”(16mm) baby pin 70 mm length tapping with 3/8”-16 thread on tip.

    • RM137.00
  • Drag and drop me to the cart

    Kupo Headrest Mounting Bracket is built by aluminum extrusion bar in black anodized, there are total 16pcs x 3/8”-16 Anti-twist threads and 5pcs x 1/4”-20 threads on horizontal and another 5pcs x 3/8”-16 threads on vertical which enable the various accessories such as monitor, recorder, wireless, focus unit and clamp to be mounted on a car’s headrest. The bracket is 42cm length can fit most of headrest with 2 bars and 3/8”-16 female threads on each end which you may connect with another bracket through a double end 3/8”-16 male adapter (KG064711) when it is necessary. The supplied 2 clamps can lock the post size from 10~11mm or 12~13mm, slide it into the track of bracket to make an ideal rigging position.

    • RM412.00
  • Drag and drop me to the cart

    Aluminum clamp with 5/8”(16mm) baby pin 70 mm length tapping with 3/8”-16 thread on tip.

    • RM97.00
  • Drag and drop me to the cart

    The Kupo hostess tray kit is primary designed for perfectly sliding an aluminum cheese plate (10” x 14“ ) into the framework between rubber seal and window of vehicle for mounting a camera or holding other equipment. To ensure the stability of tray, the offset support can be easy set up from the combination of suction cups, grip heads and 5/6”(16mm) baby rods. Two safety rope ratchets are also included to make sure the tray won’t be popped out when hooked around from window and suction cups. In addition, this simple set up provides a great operating environment where you can get in and out of the vehicle without the inconvenience of dismounting the tray.

    • RM3,340.00
  • Drag and drop me to the cart

    Kupo 6" Pump Suction Cup with 5/8" Swivel Baby Receiver is a handy accessory for supporting lights, cameras and grip gear when stands are not an option. Made of rubber material with silicon, the cup offers secure temporary mounting on smooth, non-porous surfaces at temperatures from 12° - 49°C.

    • RM420.00
  • Drag and drop me to the cart

    Adjust your camera level for lock-off shots on a variety of support platforms with the Kupo Mini Camera Ball Leveling Head. It features a solid ball sandwiched between a top and bottom plate, and it supports up to 21 pounds of camera. The level can be locked or loosened easily with the ergonomic tightening lever, which has holes drilled on the side for when you need to add a lever for additional leverage. The bottom plate is 3/8" thick and has 3/8" through-holes set 1" on-center, matching the industry-standard pattern. The top plate features a 3/8" wide slot that is about 4" long, allowing you to mount a camera directly onto it or a variety of camera mounting plates, including an ARRI sliding baseplate.

    • RM844.00
  • Drag and drop me to the cart

    Kupo KG075411 Camera Car Mount Kit has been designed with medium size cameras in mind. A 6” suction cup with angle adjustable camera bracket will securely mount a DSLR, supported by 5 suctions cups with the solid arms & adjustable knuckles. Additionally, this kit includes a hard case that protects all the equipment for storage, protection and transportation.

    • RM6,040.00
  • Drag and drop me to the cart

    Constructed from CNC machined aluminum, the cheese plate comes with plenty of industry standard 3/8” mounting holes, spaced every 1”. Features a Mitchell center allows for mounting cameras with Mitchell base tripod heads.

    • RM756.00
  • Drag and drop me to the cart

    Kupo Pump Suction Cup with 5/8" Baby Pin (3") is a handy accessory for supporting lights, cameras and grip gear when stands are not an option. Made of rubber material with silicon, the cup offers secure temporary mounting on smooth, non-porous surfaces at temperatures from 12°C - 49°C.

    • RM202.00