Arms

Items: 18 | 
Items per page:
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart

    Kupo Telescopic Operating Pole is made of aluminum alloy tube with black anodized surface finish. Constructed of four sections with three risers. While completely extended, it reaches 13.1'/4M long. Each section comes with a quick-release clamp for easier lockup. Top hook helps to maneuver the panning, tilting and focusing of luminaire mounted at high position in the studio. Top hook is interchangeable with L-shape top hook, made with a horizontal prolonged rod, for the control the lighting fixture effortlessly. Aluminum pole diameter 20, 25, 30, and 35mm.

    Spin-free connection between tubes is user-friendly, making the operation easy. Quick release tube clamp for instant lockup firmly.

    Classic Top Hook

    Laser-engraved arrow helps to fast figure out the direction of top hook.

    Telescopic operating pole is used to control the lighting fixture mounted high at the studio.

    Video links: https://youtu.be/AobrMBSNHA0

    • RM785.00
  • Drag and drop me to the cart

    Kupo Max Arm but with a wheel handle which comes with a rubber cover, more comfortable and better torque while tightening the round knob, especially for those users without gloves in a cold working environment. This is made with silicon rubber which offers excellent weather durability for long-lasting operation.

    Features

    • Adjustable arm allows positioning a camera lighting fixture or accessory within seconds
    • Supports loads of up to 4kg
    • Large rubberized hand wheel allows joins to lock at same time for precise positioning
    • Six milled flat surfaces for secure mounting
    • RM368.00
  • Drag and drop me to the cart

    Kupo Baby 5/8" Offset Arm (Chrome-plated) is an ideal way to hide a light stand by separating or "offsetting" the light from it or for extending the light over a wall or other obstruction. At one end of the 16" arm is a 5/8" Baby receiver for the stand while at the other are opposing 5/8" Baby studs to give you high or low angle options or to support two fixtures.

    • RM115.00
  • Drag and drop me to the cart

    Kupo Junior Boom Arm is made from solid steel with black coated that can support a payload up to 40kg when folded and up to 10kg when fully extended. The heavy duty tilt locking device is designed to cooperate with a 4.5” grip head to provide the ability to tightly lock and it allows the boom to slide within it to adjust the balance of your load. The heavy duty steel hook is also welded on the end of the boom for hanging counter weight.

    • RM912.00
  • Drag and drop me to the cart

    Kupo Max Arm is especially designed for lighting, video, film or stills use. The multi-positioning arm with 90° pivoting, 360° rotating ends and a 360° elbow rotation. The center ratcheted handle to control and lock all three movements, which allows partial loosening for safe and precise positioning of a small light fixture or camera exactly at the angle you need it. Both ends come with a ball joint 5/8”(16mm) studs; one is tapped for a 3/8” and the other is tapped for a 1/4”. It is so versatile that can be set at any awkward position or odd place.

    Features

    • Metal ratcheted handle for easy slight adjustment and can be rest to any angle. Ideal for clamping in a confined space, or a specific handle position is desired.
    • The metal-like engineering thermoplastic friction discs with Anti-Slip rosettes friction disc design offers a solid grip.
    • The storage length is 28.5cm and fully extend to 53cm with net weight 1kg only for compact & portable.
    • Both ball joint stud with multi-milling flats that can fit into baby socket fast and hold object stable.


    Video: https://youtu.be/jhjemAq_zhc

    • RM419.00
  • Drag and drop me to the cart

    The tailor-made aluminum yoke with black coating is special designed for apture amaram p60c that allows you tilt your led panel effortlessly. It features a v-lock base mounted on the yoke offers an ideal mounting solution for v-mount battery when the ac power is not available on locations. The 3 way 5/8”(16mm) baby receiver equipped also enables mounting in either vertical or horizontal configuration. The unique design of oblique hole makes you have an additional 35 degree tilt for eliminating barn door interference when positioning you led lighting on a stand.


    Features

    • The Tailor- Made Aluminum Yoke with black Coating is Special Designed for Apture Amaran P60C
    • That Allows You Tilt Your Led Panel Effortlessly
    • Features a V- Lock Base Mounted on The Yoke offers An Ideal Mounting Solution for V- Mount Battery when The Ac Power is Not Availableon Locations
    • The 3 Way 5/8”(16mm) Baby Receiver Equipped also Enables Mounting in Either Vertical or Horizontal Configuration
    • Unique Design of Oblique Hole Makes You Have An Additional 35 Degree Tilt for Eliminating Barn Door interference when Positioning Your Led Lighting on a Stand


    • RM363.00
  • Drag and drop me to the cart

    9”camera riser post dia.20mm aluminum w/ 3/8”-16 thread on both end (1 pc)


    Features

    • Made from Solid Aluminum
    • 12” Camera Riser Post Dia.20mm Aluminum W/ 3/8”- 16 Threadon Both End
    • 1Pc Per Package
    • Finish: Anodized
    • Weight: 500g (17.6oz)
    • Material: High Tensile 6061 Aluminum
    • RM92.00
  • Drag and drop me to the cart

    Meking Grip Helper can extends from 85- 137cm to support frame cutter. At one end of the 45-degree-angled arm is a 1-1/8" stud / receiver, and at the other end, there is a 5/8" baby stud. Using the Grip Helper, you can use the junior pin to mount to a light stand, while its receiver will accept a large light.

    • RM256.00
  • Drag and drop me to the cart

    Kupo Off-Set Female Baby Mounting Adapter - Kino Adapter allows you to mount lighting fixtures making them more stable by placing the weight closer to the center of the stand.

    • RM150.00
  • Drag and drop me to the cart

    Kupo Mini Articulated Two Section Arm allows you to position lights, small cameras, or other accessories when light stands are not an option. Each end of the arm features a grip head with a female-threaded 5/8" stud that rotates 360 degrees and locks down into position. This 22.5" arm not only gives you extra reach over the 11.2" version, but it has an extra section that is joined by a third grip head for maximum articulation.

    • RM134.00
  • Drag and drop me to the cart

    Kupo Sliding Arm with Baby Pin is a handy way to utilize pipe or truss tubes up to 1.37" (35mm) in diameter to hang lights. The arm has a double 5/8" stud, one of which has a male 1/4"-20 thread.

    • RM198.00
  • Drag and drop me to the cart

    Kupo Sidearm with Baby Pin/Receiver will let you mount equipment at any point on your stand. At the end of the arm is a 5/8" male pin as well as a 5/8" female receiver, allowing you to mount many different tools without needing any adapters.

    Video Link: https://youtu.be/4NNIyCVVH8o

    • RM284.00